100 Pcs. Techniks
Brand New CAT 50 25,000 RPM Balanced CNC Tooling Package for CNC Mill (Various Make & Models), Includes 11 Pcs. of ER 32, 5 Pcs. of ER 40 Collet Chucks, 1 Set of ER 32 x 18 Pcs. 7/32" to 3/4" x 32nds, ER 32 x 18 Pcs. 3mm to 20mm x 1mm, ER 40 x 13 Pcs. 1/8" to 1" x 16ths Collet Set, 1 Pc. of 1/4", 3/8", 1/2", 5/8" , 3/4", 1", 1-1/4" End Mill Holder, 25 Pcs.CAT 50 Pull Studs (45, 60 or 90 Degree), 2 Pcs. of ER32 Wrenches & 1 Pc. ER 40 Wrench. Enjoy Huge Saving On Techniks Certified Tooling!!!!
Kit Includes:- 11 Pcs. Techniks Brand New CAT 50 ER 32 x 4.00" 25,000 RPM Balanced Collet Chucks, Part# 22311
- 1 Set of Techniks Brand New ER 32 7/32" to 3/4" x 32nds .0002" T.I.R Collet Set, Part# 04212IS
- 1 Set of Techniks Brand New ER 32 3mm to 20mm x 1mm .0002" T.I.R Collet Set, Part# 04205MS
- 2 Pcs. Techniks Brand New ER32-E Spanner Collet Chuck Wrenches, Part# 04616
- 5 Pcs. Techniks Brand New CAT 50 ER 40 x 4.00" 25,000 RPM Balanced Collet Chucks, Part# 22321
- 1 Set of Techniks Brand New ER 40 1/8" to 1" x 16ths .0002" T.I.R Collet Set, Part# 04213IS
- 1 Pcs. Techniks Brand New ER40-E Spanner Collet Chuck Wrenches, Part# 04617
- 1 Pc. Techniks Brand New CAT 50 1/4" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22931
- 1 Pc. Techniks Brand New CAT 50 3/8" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22935
- 1 Pc. Techniks Brand New CAT 50 1/2" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22937
- 1 Pc. Techniks Brand New CAT 50 5/8" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22939
- 1 Pc. Techniks Brand New CAT 50 3/4" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22941
- 1 Pc. Techniks Brand New CAT 50 1" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22945
- 1 Pc. Techniks Brand New CAT 50 1-1/4" x 4.60" 10,000 RPM Balanced End Mill Holder, Part# 22947
- 25 Pcs. Techniks Brand New CAT 50 Retention Knobs (Standard 45, 60 ro 90 Degree to fit your CNC Mill not special), Part#
| Qty. | Part No. | Description |
|---|
| 11 | 22311 | CAT 50 x ER32-4.00 |
| 1 | 04212IS | ER 32 x 18 pc. collet set - inch |
| 1 | 04205MS | ER 32 x 18 pc. collet set - metric |
| 5 | 22321 | CAT 50 x ER40-4.00 |
| 1 | 04213IS | ER 40 x 13 pc. collet set - inch |
| 1 | 22931 | CAT 50 x SLN 1/4" x 4" |
| 1 | 22935 | CAT 50 x SLN 3/8" x 4" |
| 1 | 22937 | CAT 50 x SLN 1/2" x 4" |
| 1 | 22939 | CAT 50 x SLN 5/8" x 4" |
| 1 | 22941 | CAT 50 x SLN 3/4" x 4.0" |
| 1 | 22945 | CAT 50 x SLN 1" x 4" |
| 1 | 22947 | CAT 50 x SLN 1-1/4" x 4.60" |
| 25 | - | CAT 50 (45,60 or 90 Degree) Pull Stud/Retention Knob |
| 2 | 04616 | ER32 - E Wrench |
| 1 | 04617 | ER40 - E Wrench |
CAT 50 ER Collet Chuck- Balanced to 25,000 RPM @ G2.5
- T.I.R 0.0001" measured from taper to collet pocket
- Techniks Lab Certified each holder comes with a certificated verifying accuracy and balance
ER Collet- 0.0002" maximum run-out
- Each collet hand inspected
CAT 50 End Mill Holder- High precision bore (H5) is best in industry
- Balanced to 10,000 RPM
- Taper ground to AT3 for maximum spindle contact
CAT 50 ER Collet Chucks| Part# | Description | l1 | D | Max. Shank | Stop Screw | Wrench |
|---|
| 22311 | CAT 50 x ER 32 - 4.00", slotted nut | 4.00" | 1.97" | .788" | 06089 | 04616 |
| 22321 | CAT 50 x ER 40 - 4.00", slotted nut | 4.00" | 2.48" | 1.023" | 06091 | 04617 |
Note: Please call me @ 401-490-1141 for any questions you may have. Quantity discount available.
Other Available CAT 50 ER Collet Chucks
